Wrong behaviour of Port Security feature

[korzh]

Hello,

Can somebody explain me what I am doing wrong or is this known bug:



As you can see on the screenshot I have set "Deny" for 135 port but connections to this port are still allowed (my computer is 195.177.116.190)

[genie]

How are you connected to the internet - dialup, DSL, etc? Also, can you, please, send me your routing tables before and after the external connection is established - we had an issue with some USB connections.

[korzh]

I have permanent LAN connection to Internet. The building where our office is placed has router (195.177.116.189) which is connected directly to our ISP by wireless link (they called it "Radio ETHERNET"). All hosts in the building are linked to this router through LAN.
In my office there are two other computers which are connected to Internet through my computer (195.177.116.189) using WinGet ENS.

Here is my routing tables:

Code: Select all

===========================================================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x3000003 ...00 00 1c 81 18 c3 ...... NDIS 5.0 driver                                                                 
===========================================================================
===========================================================================
Active Routes:
Network Destination        Netmask          Gateway       Interface  Metric
          0.0.0.0          0.0.0.0  195.177.116.189     192.168.0.1     1
        127.0.0.0        255.0.0.0        127.0.0.1       127.0.0.1     1
      192.168.0.0    255.255.255.0      192.168.0.1     192.168.0.1     1
      192.168.0.1  255.255.255.255        127.0.0.1       127.0.0.1     1
    192.168.0.255  255.255.255.255      192.168.0.1     192.168.0.1     1
  195.177.116.188  255.255.255.252  195.177.116.190     192.168.0.1     1
  195.177.116.190  255.255.255.255        127.0.0.1       127.0.0.1     1
  195.177.116.255  255.255.255.255      192.168.0.1     192.168.0.1     1
        224.0.0.0        224.0.0.0      192.168.0.1     192.168.0.1     1
  255.255.255.255  255.255.255.255      192.168.0.1     192.168.0.1     1
Default Gateway:   195.177.116.189
===========================================================================
Persistent Routes:
  None



[korzh]

I meant "WinGate" of course in the previous message instead "WinGet"

[genie]

From what I can see here you have only one interface which you want to use as both local and external one - it confuses Wingate. If you install another NIC and declare one of them local (private/trusted) and another one as external (public/non-trusted) then your firewall starts behaving as it is supposed to.