Where can I download 5.0.7?

Oct 05 03 4:28 pm

I inadvertently deleted my 5.0.7 installer. 5.0.8 is not stable for me. Where can I download 5.0.7?

-- Steve

Oct 05 03 8:07 pm

Why do you thing 5.0.7 is more stable then 5.0.8??

Oct 06 03 3:46 am

I had been running 5.0.7 for many months and it worked. It accepted connections from Clients using NAT. It could cause my modem to dial, and in general 5.0.7 stayed running for up to 15 days before crapping out (i.e. refusing client connections). By far this was the most stable Wingate release in two years. 5.0.8 on the other had seems to refuse all client requests unless my modem has connected, but 5.0.8 won't dial the modem. Also even if I manually dial the modem, 50% of the time Wingate still refuses client connections.

Oct 06 03 9:28 am

Are you using the WWW proxy, or via transparent redirect?

Adrien

Oct 06 03 1:00 pm

OK, we just found something in our network driver that could be causing a problem like this.

I am going to make a couple of changes in it - would you be able to test and see if that fixes the problem?

Adrien

Oct 06 03 1:28 pm

I will try the new driver if you send it to me.

Yes I am running TR thru WWW Proxy, FTP Proxy, and POP3 Proxy. 5.0.8 seemed to behave better once I turned off TR...although it still had problems like within a few hours Wingate would still refuse client connections...but it did behave better than when TR was on. Also, and this could be a completely separate issue, but it seems that if after Wingate causes the modem to hang up, then the modem will no longer register with my ISP. What I mean is that the modem dialer shows "connecting", then "verifying username/password", then "registering", then it gets "TCP/IP CP error 31" and disconnects. I tried 10 times in a row and still got "TCP/IP CP error 31". Turning on/off the modem doesn't help. The only thing that helps is rebooting the server and then I can successfully connect & register with my ISP one time, but once Wingate causes a modem hangup, then my modem can no longer register with my ISP.

Thanks for helping me.

-- Steve

Oct 06 03 1:57 pm

OK, I made some changes - just going to test them here first, then I will send you an XP driver.

Adrien

Oct 06 03 2:02 pm

I am running Win2k. Is the XP driver usable by me?

Oct 06 03 2:40 pm

OK, It is looking good, I'll send you a 2k driver now

Adrien