Use this forum to post questions relating to WinGate, feature requests, technical or configuration problems
Mar 22 04 8:19 pm
Good day to everyone.I am back from linux and ready to enjoy the full benefit of Windows and Co.....and Mr. Freeze.So, problems and questions:
1.I have several public IP's and I want to give some of them to machines in my network.I have Win 2000 Server with 1.8 XP,128m RAM and 1.5 Gb of virtual mem, Wingate 5.2.3 and two NIC's.Can it be done?
2.If I scan, more like brute scan, my server from the inside with fast packets, Wingate give's error msg's like "03/16/04 10:36:10 ENS Undefined ENS memory problem - possible cause: memory exhaustion. Statistics: Kernel mem: 0, Frag mem: 0" in logs.It is true, the internet conection is still on.Still, the activity in GateKeeper will not show corectly until reboot, no matter how long I wait after the scan.That is, I still se my scan (a long list) as active, and the legit activity I can not.
3.I have a Public subnet of 255.255.255.192.In the network tab in Gatekeeper I can see many workgroups on the same subnet, as well as my own.I have disabled on the public NIC all but TCP/IP, incl. NetBIOS over TCP(disabled).On the internal NIC I have TCP , file and print shareing and client for MS Networks.In gatekeeper I have uncheked "support for multiple subnets".My private subnet is 255.255.255.0
If I can see others showing up in network tab, others can see my workgroup and machines as well?If so, how can I correct this?
Thank you for your time and hope for some solves.
Mar 25 04 7:37 pm
OK.SO far so good :(
I managed to get it "work".
If I put on eth0 (public) a valid Public IP and on eth1 a private IP like 192.168.1.1 and then add a valid Public IP it's not working.
But, if on eth1 I put first the public IP and then add the private one it's working....kindaaa.
Even if in Gatekeeper I have 192.168.1.1 as trusted and not public and the other two IP's as not trusted and public, all the trafic from the 192.168.1.x network will be blocked in the firewall.I have the policy to allow all from lan to net and deny all from outside.If I set the second public IP from eth1 as trusted also it is working.But I do not want that.Is there a way arround this and why Wingate blocks my internal traffic, seeing it as traffic from the outside?
Does anyone have a solution?Pls