Can not See DHCP Server

Sep 25 05 4:50 am

I just installed the latest version of Wingate on the 'Server' PC, my problem is none of the other PCs on the network can see the 'Server' PC let alone the DHCP server. All client PCs are set ot auto obtain IP. what am I missing?
Thanks

Sep 25 05 6:19 am

Hello,

Check that your internal LAN adapter on the WG PC is marked as internal. See this post.Let us know if this helps.

Sep 25 05 10:24 am

It is configured correctly as the internal NIC, and my two other NICs are both properly configured as external. I currently run NAT32e on the PC and everything works fine. I am trying to see if WinGate would work better, but when I start up WinGate on the same machine, the box completely dissapears from my network for some reason. I can not ping it or anything. I am completely baffled.

Sep 25 05 11:51 am

Hi

It's generally a bad idea to run more than one NAT or firewall application on the same server, as the network drivers for these applications often interfere with each other. You may need to disable the other program to get WinGate to operate properly.

Adrien