WinGate on one NIC

Sep 16 06 4:05 am

Hi all. I know this is possible, but I really don't know how to do it. How can I use WinGate on a server PC that has only one NIC? The scenario is like this: the network card has a static IP assigned for Internet, so no DHCP. The IP is in this form: 86.104.100..... The other computer, the client, has a LAN IP (like 192.168.100.100), so I assume that the server PC should have an IP like this too. I know how to add a second IP in the TCP/IP protocol, but I don't know how to setup WinGate so it will work.

Thank you.

Sep 16 06 10:40 pm

What version of Wingate are you running?

Sep 22 06 5:02 am

Wingate 6.0.4

Sep 22 06 1:51 pm

Hi

WinGate 6.1 supports single-NIC NAT, so I'd recommend upgrading to that. You won't need to assign another IP address unless you are using multiple logical subnets (i.e. multiple IP ranges) on your LAN.

Adrien