Need Help Badly

[zedpoint]

Hi there
im using wingate 5.2.2.. it was going great but suddenly im facing big problem.. and the problem is dns error socs somehting like that..
let me explain ..........

most of the time when i click any site the msg i got dat is the page Cannot be Displayed.. my gateway is 10.1.1.1 port 8080 if i click 5 sites at once all pages are errors... suddenly it is happend.. pls help me to solve this problem.. i loooked my explorer toolbar and it shows some socks or dns error and the page is cannot be displayed..

thanking You

AD
to_alpharomeo@yahoo.com

[adrien]

Hi

Are you running the SOCKS server for all access?

Sounds like it could be a DNS error.

Are you able to ping machines by name? i.e. run command line (cmd.exe) type in "ping www.wingate.com"

Do you get back "pinging 210.55.214.36 with 28 bytes of data"

or do you get

"bad host name www.wingate.com"

?

Adrien

[zedpoint]

Dear Adrien
Thanks for your Reply..
yeah i got reply from wingate.com
here is the result...
Microsoft Windows 2000 [Version 5.00.2195]
(C) Copyright 1985-2000 Microsoft Corp.

D:\Documents and Settings\Administrator>ping www.wingate.com

Pinging steak.qbik.com [210.55.214.36] with 32 bytes of data:

Reply from 210.55.214.36: bytes=32 time=961ms TTL=107
Reply from 210.55.214.36: bytes=32 time=842ms TTL=107
Reply from 210.55.214.36: bytes=32 time=841ms TTL=107
Reply from 210.55.214.36: bytes=32 time=872ms TTL=107

Ping statistics for 210.55.214.36:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 841ms, Maximum = 961ms, Average = 879ms

D:\Documents and Settings\Administrator>



yeah it is dns error.. n i dont understand bout socks matter pls explain me to set new correct settings...

thank you
AD

[zedpoint]

Dear Adrien

i looked the toolbar of my expolorer bar.. .. its shows very fastly thts why i cud not catch it correctly.. here it is
d://winnt/system32/shdoc.dll./dnserror something like dat...
and i would like to know the correct settings of binding and interface..
my internel lap ip is 10.1.1.1 and my provider Ip is 63.219.1.4
i connected internet through pppoe and im using windows 2000 advanced server...

thank you
AD

[zedpoint]

Dear Adrien

sometimes i got big packetloss
Pinging steak.qbik.com [210.55.214.36] with 32 bytes of data:

Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 210.55.214.36:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms

D:\Documents and Settings\Administrator>

D:\Documents and Settings\Administrator>ping www.wingate.com

Pinging steak.qbik.com [210.55.214.36] with 32 bytes of data:

Request timed out.
Reply from 210.55.214.36: bytes=32 time=932ms TTL=107
Reply from 210.55.214.36: bytes=32 time=841ms TTL=107
Reply from 210.55.214.36: bytes=32 time=1342ms TTL=107

Ping statistics for 210.55.214.36:
Packets: Sent = 4, Received = 3, Lost = 1 (25% loss),
Approximate round trip times in milli-seconds:
Minimum = 841ms, Maximum = 1342ms, Average = 778ms

D:\Documents and Settings\Administrator>


what should i do pls help me ...!!!

thanking you

Ad

[adrien]

This ping was run on a client machine right?

What settings do you have in Internet Explorer (under tools->Connections->LAN settings)?

SOCKS is a protocol that allows applications to make connections - kinda like a telephone operator, you connect to the SOCKS server, tell it who you want it to connect you through to and go from there.

Internet Explorer supports SOCKS (you would see it at the bottom of the proxy configuration page).

If you are using SOCKS, it requires that DNS be working since it connects (usually) to an IP address.

But if you can resolve names (like www.wingate.com) into IP addresses on your client machines, then it looks like DNS must be working.

we did have a few problems with 5.2.2, but if it was working fine for a long time, then suddenly there is a problem, something must have changed. Maybe a service pack installed on the server?

Adrien

[zedpoint]

Dear Adrien

im using http proxy..
lan settings>no tik mark is automatically detect and use automatic configuration Script
only two tik mark is there >>use a proxy Server> 10.1.1.1 port 8080 and Tik mark is Bypass....
im using windows 2000 advance Server and services pack 4 is installed there.. but same problem!!!


Ad

[adrien]

Hmmm

WinGate 5.2.2 is quite old now. We made significant changes to the DNS server, DNS resolver and HTTP proxy in later versions of WinGate.

If you upgrade to WinGate 6 you can still use your WinGate 5 license, that may have fixed this problem already. We did have some problems with Windows 2000 SP4 as well in earlier versions (my memory on it is a bit hazy, but it's quite possibly the version you are running).

Adrien

[zedpoint]

Dear Adrien.

is it possible to fix this version?Cause it was going well.. i think something is wrong.. pls help me to solve this problem...
if i open two many urls it happens...


Thanking You

AD

[adrien]

So do you have any idea what may have changed in your system?

Adrien

[zedpoint]

Dear Adrien..

i didnt change anything.. i have reinstalled my OS.. But same problem!!!!
can u pls tell me the settings?
what ll i set Bindings? and interface?

AD

[zedpoint]

Dear Adrien..

i didnt change anything.. i have reinstalled my OS.. But same problem!!!!
can u pls tell me the settings?
what ll i set Bindings? and interface?

AD

[zedpoint]

Dear Adrien
please help me!!!!
same error.. nobody can able to browse ::(