Wingate and three external(real) ip

[EvilAlex]

I have 3 external(real) ip addresses and an internal network.
How i can adhere, with wingate help, these 3 external ip to internal computers.

Example:
External(real) ip: 1.2.3.4 / 1.2.3.5 / 1.2.3.6
Internal: 192.168.1.1 / 192.168.1.5 / 192.168.1.7
192.168.1.1(wingate)

Should be adhered:
1.2.3.4 to 192.168.1.1
1.2.3.5 to 192.168.1.5
1.2.3.6 to 192.168.1.7
How? wingate 6
Enabled only NAT and standart services

Sorry for bad english

[adrien]

Hi

Not sure what you mean by adhere. Is this so that incoming connections on connection 1 go to LAN machine 1, connection 2 to LAN machine 2 etc?

If that's what you want to do, it's not possible to forward all traffic like that with WinGate ENS, since it does not distinguish between different external interfaces.

You can however forward specific single ports using TCP mapping proxies. You can bind these to individual external interfaces, and map them through to the correct internal machine. It would mean a new proxy per port per interface though.

If this is just for say web access, no problem.

Or is it that you want an internal machine to use a specific external connection for its internet access?

Adrien