VLAN, Transparent Proxy

Use this forum to post questions relating to WinGate, feature requests, technical or configuration problems

Moderator: Qbik Staff

VLAN, Transparent Proxy

Postby sroghen » Oct 16 06 5:13 am

Hi,
I have several VLANs in my network.
Asuming WinGate on VLAN 1 (native), dept1 on VLAN 2 and dept2 on VLAN3.

Is it possible to:
Monitor and restrict users in dept1 to certain websites through the proxy without any configuration done to the browser. Give dept2 users full access to internet but still log their access with no configuration on browser
(Users on Linux and windows, some also on Terminal server.). What configuration to set?
sroghen
 
Posts: 3
Joined: Oct 16 06 5:06 am

Postby adrien » Oct 16 06 10:30 am

If these VLANs are also on different IP subnets, then you can use IPs in the policies to handle what you want.

WinGate policies are additive - each policy you add grants something more access.

so for instance if VLAN1 was 192.168.0.x, VLAN2 was 192.168.1.x etc then you could have policies in the WWW proxy like

1. Everyone, user may be guest
Location:
included: 192.168.0.*
Advanced tab:
Filter 1
site contains "allowedsite1"
Filter 2
site contains "allowedsite2"
Filter 3
site contains "allowedsite3"
etc

2. Everyone, may be guest
Location
included: 192.168.1.*

Enable transparent proxy in the WWW proxy.

Adrien
adrien
Qbik Staff
 
Posts: 5448
Joined: Sep 03 03 2:54 pm
Location: Auckland

Postby sroghen » Oct 16 06 5:54 pm

Thanks Adrien for your reply.

That is correct VLAN1 and VLAN2 are different subnets.

So thats one issue resolved, I can control internet access based on IP address/subnets.

1. Transparent proxy. This is one of the most important aspect. We do not want to configure each and every user's browser settings to go through the proxy. The server must be plug & play.

From your response, do I gather that enabling transparent proxy will do what I want?

2. How will the network setting be?

LAN -->SWITCH --> HUB --> WINGATE & INTERNET GATEWAY (ADSL ROUTER)

Will the above be appropriate?

Regards
Roghen
sroghen
 
Posts: 3
Joined: Oct 16 06 5:06 am

Postby sroghen » Oct 19 06 1:25 am

Anyone?
sroghen
 
Posts: 3
Joined: Oct 16 06 5:06 am

Postby adrien » Oct 19 06 10:23 am

Hi

That should work.

Transparent proxy is enabled in the WWW proxy on the sessions tab.

As for network configuration, you normally get better control if WinGate has 2 interfaces - 1 to the LAN and 1 to the Internet, but WinGate will do NAT and transparent proxy even with only one interface.

Adrien
adrien
Qbik Staff
 
Posts: 5448
Joined: Sep 03 03 2:54 pm
Location: Auckland


Return to WinGate

Who is online

Users browsing this forum: No registered users and 3 guests