Wingate WinXP Prof ENS Problem

Apr 15 07 5:03 am

Hello.

i use wingate 6.2.1.

wingate works under win2000.

now i have changed to win xp prof.

and nothing works.

i have 2 network adapters, one for the dsl connection and one to my switch for the local network.

if i install wingate without ens driver, my ip adress from both network adapters and my dsl dial i works.
but the routing function will not work on wingate

if i install wingate with ens driver, my ip adress from both adapters ist 127.0.0.1 and my dsl dial in doesn't work

is there a trick to install the ens driver under win xp prof?

thanks for your help and sorry about my bad english
german is better ;)

Apr 16 07 10:41 pm

1. Can't say I have ever heard that the ENS driver can set the ip addresses on the network cards as 127.0.0.1? i.e. that does not sound correct.

2. On Windows XP Pro SP2, it is a good idea to disable the Windows Firewall in the Windows Services. You should also disable any other security or networking suites for the sake of testing if you deem it safe.

3. Confirm your network cards are correctly marked as INTERNAL / EXTERNAL. The network card pointing towards the internet is generally marked as EXTERNAL, and the network card pointing towards the LAN is generally marked as INTERNAL in WinGate.
GateKeeper --> View menu --> Networks --> Network Connections.

4. Make sure any default gateways or dns servers are only set on the network card that has access to those networks.

If you still need assistance, can you post an ipconfig/all when the ENS is installed?
(Windows) Start menu --> Run --> cmd --> ipconfig/all > c:\ipa.txt

Apr 18 07 12:00 am

Hi

Are you running any other firewall software on that computer?

That can sometimes interfere with network adapter initialisation.

Regards

Adrien

Apr 18 07 7:04 am

hello

here is my configuration.

Network Card 1:
D-Link DFE-530TX PCI Fast Ethernet
TCP/IP Automatic
DNS Automatic

This is connected to my dsl modem(not a router)

Network Card 2:
Realtek RTL8169/8110 Family Gigabit Ethernet NIC
TCP/IP 192.168.100.1
Gateway 255.255.255.0
DNS blank

This is connected to my switch for the other pc's

WAN Miniport Connection
i connect over a PPPoe Connection to the Internet
TCP/IP Automatic
DNS Automatic

I use Kasperkey Internet Security 6.0

Windows Firewall is off.

If i install wingate with ENS

i have only the MAC Address and no TCP/IP Address on each Network Adapter.

The PPPoE Dial in doesn't work

Here my ipconfig without wingate and ens

Code:: Windows-IP-Konfiguration Hostname. . . . . . . . . . . . . : computer Primäres DNS-Suffix . . . . . . . : Knotentyp . . . . . . . . . . . . : Unbekannt IP-Routing aktiviert. . . . . . . : Nein WINS-Proxy aktiviert. . . . . . . : Nein Ethernetadapter DSL: Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : D-Link DFE-530TX PCI Fast Ethernet A dapter (rev.A) Physikalische Adresse . . . . . . : 00-50-XX-C6-XX-XX DHCP aktiviert. . . . . . . . . . : Ja Autokonfiguration aktiviert . . . : Ja IP-Adresse (Autokonfig.). . . . . : 169.254.125.20 Subnetzmaske. . . . . . . . . . . : 255.255.0.0 Standardgateway . . . . . . . . . : Ethernetadapter HOME LAN: Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Realtek RTL8169/8110 Family Gigabit Ethernet NIC Physikalische Adresse . . . . . . : 00-01-XX-5F-XX-XX DHCP aktiviert. . . . . . . . . . : Nein IP-Adresse. . . . . . . . . . . . : 192.168.100.1 Subnetzmaske. . . . . . . . . . . : 255.255.255.0 Standardgateway . . . . . . . . . : PPP-Adapter T-Online: Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : WAN (PPP/SLIP) Interface Physikalische Adresse . . . . . . : 00-53-XX-00-00-XX DHCP aktiviert. . . . . . . . . . : Nein IP-Adresse. . . . . . . . . . . . : 91.17.254.xxx Subnetzmaske. . . . . . . . . . . : 255.255.255.xxx Standardgateway . . . . . . . . . : 91.17.254.xxx DNS-Server. . . . . . . . . . . . : 217.237.149.xxx 217.237.151.xxx NetBIOS über TCP/IP . . . . . . . : Deaktiviert

i post the config with wingate and ens next time

Apr 18 07 7:21 am

now here the results after installing wingate with ens

by installing wingate, the setup show me this message:

Code:: The WinGate installer has detected an installation of Windows Internet Connection Sharing (ICS) on this computer. WinGate may not operate correctly if ICS is used. Please ensure that if you are installing WinGate ENS, you disable ICS.

After installing and reboot.

the ipconfig /all gives no results nothing!!

here the WINGATE CONFIGURATION REPORT

Code:: 1.01 WINGATE CONFIGURATION REPORT 1.02 Tuesday, April 17, 2007, 20:12 1.03 1.04 --------------------------------------------- 1.05 WinGate Engine 1.06 --------------------------------------------- 1.07 WinGate 6.2.1 (Build 1133) 1.08 Operating System: Windows 2000 (NT 5.1) 1.09 Language: 1.10 User database: WinGate 1.11 Num. users: 3 1.12 1.13 3.01 --------------------------------------------- 3.02 Licence details 3.03 --------------------------------------------- 4.01 --------------------------------------------- 4.02 Dialer information 4.03 --------------------------------------------- 4.04 Dialer is disabled 4.05 5.01 --------------------------------------------- 5.02 Network Interfaces 5.03 --------------------------------------------- 5.04 T-Online (Dialup) external 5.05 HOME LAN (Ethernet) external 5.06 DSL (Ethernet) external 5.07 1394-Verbindung (Ethernet) external 5.08 MS TCP Loopback interface (Loopback) 5.09 6.01 --------------------------------------------- 6.02 Services 6.03 --------------------------------------------- 6.04 6.05 System Policies 6.06 --------------------------------------------- 6.07 Default System Access Rights: 6.08 Default Start/Stop Rights: 6.09 Default Edit Rights: 6.10 6.11 Remote Control Service (Remote Control Service) 6.12 --------------------------------------------- 6.13 Session Timeout: 180 6.14 Port: 808 6.15 Startup: Automatic start/stop 6.16 Access Rights: Defaults: are ignored 6.17 Everyone - Unrestricted rights 6.18 Start/Stop Rights: Defaults: may be used instead 6.19 Edit Rights: Defaults: may be used instead 6.20 7.01 --------------------------------------------- 7.02 System Route Table 7.03 --------------------------------------------- 7.04 Current Route Table: 7.05 --------------------------------------------- 7.06 Network Mask Gateway Interface Metric 7.07 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 7.08 9.01 --------------------------------------------- 9.02 END OF CONFIGURATION REPORT

on line 1.08 Operaiton system..
there must be an error i use win xp prof with sp2

Apr 18 07 9:48 am

I believe this problem may be caused by Kasperkey Internet Security 6.0. I have seen reports of similar conflicts between Kaspersky and WinGate VPN (which relies on the ENS driver).

Are you able to uninstall Kaspersky to see if this helps your situation?

Apr 20 07 8:02 am

now i have uninstall Kaspersky internet security 6 and install wingate.

everything works on wingate!!

then i have installed Kaspersky internet security 6 again and wingate doesn't work!!

now who is the bad program?
windows? wingate? KIS6?

i change my OS back to win2000
on win 2000 KIS6 and wingate works fine

Apr 22 07 11:57 am

we have been in discussion with Kaspersky Labs about this, and they have worked out the problem. They say it will be fixed in the next version of KIS (7.0).

Adrien