Wingate Secondary IP address Problem

[i.papava]

I have 2 lan cards and wingate 5.2 with NAT. also on wan interface i have 2 ip addresses from different subnet.
PROBLEM:
from local PC impossible to achieve secondary ip subnet.

I have question :
Is solved this problem in last release 5.2.2 ?
Now i have wingate 4.5.3 and has not such problerm,
but because hung ,wingate needs PC restart everyday( maybe more)

[adrien]

Hi

What IP address ranges are you using on these interfaces?

Check also that the Options->Advanced->System Interfaces settings are correct.

Also, there could be problems if one IP on the same physical interface is private and another one public.

Adrien

[i.papava]

I have configured well .
I have done it many times with different Wingate version.
IP Addresses: 62.168.189.6 mask 255.255.255.240 (primary)
194.84.163.10 mask 255.255.255.240 (secondary)