I have wingate 5 and 3com 3c905-tx network interface

[rochu2]

I had my network and my wingate configured and working properly with 2 encore network cards, now i have installed the 3com 905-tx cards, and my network still works, but wingate doesn´t. It does not list the 3com network adapter on the bindings section, as if it wouldn´t see it. Therefore my wingate client machine doesn´t have internet, as the wingate server machine cannot bind the 3com netowrk adapter to thewingate 5 program

[erwin]

Hi there

We have done quite extensive testing with the 3com 905tx cards

Do they have their IP addresses configured correctly?.(with private/external IP address etc.)

Have you restarted the WinGate engine, the reason I ask this as any new Network interfaces will be detected and bound in WinGate on engine start.

Regards
Erwin

[rochu2]

I have tried several posible solutions, but the only solution that I have found and is a partial one, is, if I reinstall Wingate and reboot as setup requires it, then that time it will work and find the 3com cards, but on next reboot it will stop working, not detecting them any longer, until next reinstallation.