Help with Wingate setup

[didar]

Im having trobble sharing internet to clients using Wingate. My Server is configures as follow:

ISP network card
Static ip with Gateway and DNS server
IP-adress . . . . . . . . . . . . : 213...
Nätmask . . . . . . . . . . . . . : 255.255.255.0
gateway . . . . . . . . : 213...


Internal network:
Static IP
IP-adress . . . . . . . . . . . . : 192.168.1.1
Nätmask . . . . . . . . . . . . . : 255.255.255.0
gateway . . . . . . . . :

Clients
Static IP
IP-adress . . . . . . . . . . . . : 192.168.1.X
Nätmask . . . . . . . . . . . . . : 255.255.255.0
gateway . . . . . . . . : 192.168.1.1

Server can ping clients, external ip and webadress
Clients can ping server, external ip and webadress

I have controlled that extranal adapter is set to external and so on.

Clients cant do anything on the net but server is fine.

[genie]

You said that the clients can ping server, external ip and webadress - does it mean that the only functional traffic is ICMP (ping)?

[didar]

In wingate i see that clients are trying to connect to different ips bute there is no data transfer.

Clients browsing with IE are waiting for response and nothing more happends.

ping is the only thing that works fine.

[genie]

Ok, first thing first - what version of Wingate are you using? How do your clients connect - proxy, NAT, WGIC? What kind of traffic do you see when the clients start connecting - DNS requests, www sessions, NAT sessions?

[didar]

Im using WinGate6.0.4.1025-USE

Clients only have the config i wrote before. No proxy or WGIC.

At server i se NAT sessions when a clients try using any internet application.

[genie]

What network cards do you have installed on the server?

[didar]

adapter conected to internet : VIA Rhine II Fast Ethernet Adapter (built in motherboard)
Adapter to internal network: Realtek RTL8029(AS) PCI Ethernet Adapter (10mbit pci card)

[genie]

Yeap - you have to start WGOptions application (Start/Programs/Wingate/Advanced Options), switch to "Hardware specific" page and tick Realtek 8029 support. Then click OK and reboot the machine.