Not Accessible....HELP

[Taco]

From the outside I can see all the PC in the LAN but can only access the VPN-server.
I want to access the LAN behind the VPN-server.
I can see all the PC's on the LAN in Gatekeeper but can only access the VPN-Server.

My VPN-server has 2 NIC's.
1: 192.168.1.2 connected to ADSL-router
2: 192.168.0.250 connected to LAN

On the VPN-server I can access the LAN with no problems

I have installed RIP V2 on the PC's in the LAN, I have set the default gateway to the VPN-server on the PC's in the LAN,I have set all the MTU's to 1350....
Still "not accessible" ???? Only the VPN-server is accessible.
I have set participation to local network on the VPN-server.

HELP please...

[Pascal]

Can you ping any of the machines behind the VPN Server from the joining node ?

There is a fairly comprehensive document that takes you through troubleshooting the VPN setup in our WhitePapers section.

[Taco]

I got the whitepaper thanks....

Now the not accessible signs are gone but I still can't open any of the PC's on the lan.....

[Pascal]

That means that at least netbios is travelling across the tunnel, etc. So, two things to try next:

1. Try to reach the machines via an IP address: e.g. \\192.168.13.1
2. Confirm that you can ping them