Can´t access remote server

[aelvira]

I have my main network with this configuration:
network address with ranges 192.168.1.x 255.255.255.0
3com router has 192.168.1.1
Wingate VPN Server with Wingate Professional license has 192.168.1.145 and I want to access a second server in address 192.168.1.157 on that network.

My client network has it´s addresses as follows
192.168.0.x 255.255.255.0
3 com router has 192.168.0.1
Wingate Enterprise Server license is on 192.168.0.5
from this equipment i can see that the tunnel is set and I can work with no problems in the remote network
however in the other pc´s on this network I can only see in my network places the remote workgroups, when I try to access them I get a message that I don´t have permissions to use that resourse or that it couldn´t find the access route.
In this pc´s I have ripclient installed
I can not ping from thepc´s the remote server, only from the pc which is doing the tunneling ¿what am i doing wrong?
Please I need urgent help
Thanks

[adrien]

Hi Tony

Which routes are being published on both ends?

In order for other computers on a LAN to be able to access a VPN, then the local subnet routes for that LAN need to be published.

Adrien

[aelvira]

Hi Tony

Which routes are being published on both ends?

In order for other computers on a LAN to be able to access a VPN, then the local subnet routes for that LAN need to be published.

Adrien

Local routes are published on both ends, however I can only ping the remote vpn server from de vpn client which has Wingate installed, the other pc´s which are behind this pc, see the remote server but can´t access it

¿any suggestions?

[adrien]

Hi tony

Check out

http://forums.qbik.com/viewtopic.php?t=2801

Adrien