VPN SETUP USING A 3G (VERIZON) CARD

Forum for all technical support and trouble shooting of the WinGate VPN.

Moderator: Qbik Staff

VPN SETUP USING A 3G (VERIZON) CARD

Postby ybrit » Mar 18 09 4:46 am

Hi.

I have found it very easy to set up my VPN's except a new one I am trying.

I setup up the client side (vista64) with a 3g Verizon card and I can ping the home office
side but I can not ping the client side from the home office.

I think the problem is no default gateway on the client side. The internal network on the client
is 192.168.6.1.

What to do?
ybrit
 
Posts: 5
Joined: Mar 15 09 4:58 am

Re: VPN SETUP USING A 3G (VERIZON) CARD

Postby adrien » Mar 18 09 7:29 am

Hi

What routes are exported by the client?

These are what makes it accessible or not.

Are any routes showing up as in conflict on the server or client?
adrien
Qbik Staff
 
Posts: 5441
Joined: Sep 03 03 2:54 pm
Location: Auckland

Re: VPN SETUP USING A 3G (VERIZON) CARD

Postby ybrit » Mar 18 09 9:05 am

Published route:

255.255.255.255/75.213.174.46 (dynamic - changes every connection - say once a day. - verizon card)
255.255.255.255/192.168.6.1

The client properties in the VPN tree in wingate shows a IP address issued by a T-1 router - I have no idea where this is coming from.
Ipconfig shows two connections as above plus some IPv6 connectors that I have no knowledge of.
ybrit
 
Posts: 5
Joined: Mar 15 09 4:58 am

Re: VPN SETUP USING A 3G (VERIZON) CARD

Postby jeff » Mar 18 09 9:46 am

Hi

On client side, do you have your network card connected to a physical network ? (to make the "Link" comes up, and then be able to publish you local route)
If no link is detected, the route won't be published.
I had the same problem using a 3G card. I found an issue using a virtual network adapter. (the link is always "UP", so the IP is allways published thru the VPN).
You can find it here.
http://www.ntkernel.com/w&p.php?id=32
You will be able to reach the virtual ip at any time from the other side of the VPN.(as far as you publish the ip)
You just have to configure the IP / Mask. No gateway needed

Regards.
Jeff
jeff
 
Posts: 37
Joined: Apr 22 04 8:57 am


Return to WinGate VPN

Who is online

Users browsing this forum: No registered users and 3 guests

cron