Wingate 7 supports VPN site-to-site?

Forum for all technical support and trouble shooting of the WinGate VPN.

Moderator: Qbik Staff

Wingate 7 supports VPN site-to-site?

Postby bentech » Jul 11 13 9:08 am

Hi,
Is it possible to run Wingate VPN servers at two branches and having a 'Site to Site' connection which each other?
Thanks for your answers.
bentech
 
Posts: 4
Joined: Jan 18 12 7:39 pm

Re: Wingate 7 supports VPN site-to-site?

Postby adrien » Jul 11 13 3:02 pm

Hi

yes this is possible and commonly done.

You'd just set up a WinGate VPN at each site, have one site's WinGate host a VPN, and the other site's WinGate join it.

Issues to get around;

* if the hosting site is not on a fixed IP, you may need to use some dynamic DNS service to discover the location of it.
* if the hosting or joining site is behind a NAT, you may need to forward ports in the NAT.
* the 2 sites need to be on different logical subnets (e.g. different ranges of IPs, e.g. 192.168.0.x on one, and 192.168.1.x on another)

Regards

Adrien
adrien
Qbik Staff
 
Posts: 5236
Joined: Sep 03 03 2:54 pm
Location: Auckland


Return to WinGate VPN

Who is online

Users browsing this forum: No registered users and 3 guests