WE NEED HELP FOR OUR CONFIGURATION ON OUR VPN WINGATE

[TWcan]

We work with wingate proxy since 4 years. We have a VPN wingate too in the master society. To connect the master via the vpn with an alone computer it is ok. We want to connect another network site which run wingate too by vpn connection. The connection made and the tunel works very well. But we do not have access to the computer which are connect on the network in the master proxy from the remote network(only access from the server wingate remote computer). If we connect to the master proxy anywhere whith a portable computer we can access to the network computer in the master proxy. So the master seems like working with goods parameters.

We want the remote computer could access via their wingate proxy(on their network) to some computers network in the master network via wingate VPN.


Did you have some ideas whay the remote can t access to the computer on the network host since the tunel is working; we can access to the computer on the network host from individually connection; we can access to the computer on the network host from the remote server wingate too.

Does any one have a solution...
Thanks.
Best regards.
Philippe

[adrien]

Hi

How do the two WinGate VPN clients connect to the internet? If it is behind a NAT then for the clients to communicate properly, one of the NATs will need to be configured for a "pinhole" on port 809 TCP and UDP.

Whenever you get the scenario


VPN Client A -> NAT -> Internet-> NAT -> VPN Client B

then one NAT needs to have the tunnel (809 UDP) and control (809 TCP) ports open and piped through to the WinGate VPN machine on that LAN.

Also, there are settings in the WinGate VPN which dictate whether a node is visible by other nodes.

Adrien