Can Connect To everything behind host except host itself

[ajdionne]

Hello everyone,

I haven't still resolve that issued

Detail Setup2.17

A) Public IP address 24.XXX.XXX.XXX attach to d-link firewall/router
B) Router as UDP and TCP port 809 Open
c) Router DHCP address (Cloned) assign to Wingate Server 172.17.1.100 to Public NIC
d) Internal NIC address 192.168.1.1 which is also the gateway address of server. All other worksation received adrres from wingate DHCP server

Can Ping 192.168.1.2 192.168.1.3 but cannot ping 192.168.1.1 Server name is mygate and it is always mark as unaccessible all other workstation are accessible


Publish route behind NAT are: (on Wingate server as seen from client)
172.17.1.100 255.255.255.255
192.168.1.0 255.255.255.0
192.168.1.1 255.255.255.255


Publish route on client

Public address 161.XXX.XXX.XXX 255.255.255.255

WHAT AM I DOING WRONG?? THIS STARTED SINCE YPGRAGE FROM 5.1.6 OR SOMETHING

[Pascal]

Can Ping 192.168.1.2 192.168.1.3 but cannot ping 192.168.1.1 Server name is mygate and it is always mark as unaccessible all other workstation are accessible

That all looks right. Can you access the server by using \\192.168.1.1 ? I don't think you will be able to, because you cannot ping it - but want to confirm that.

[ajdionne]

Hello Pascal

I have now wingate working perfectly and the vpn connection is wonderful.

Unfortunatly because I have been trying to fix problem for more than a month, I have taken drastic measure.

By reinstalling Windows XP from scratch then installing wingate it cured the problem. It is too bad that I could not fix problem without reinstalling.

PLEASE NOTE AGAIN THAT PROBLEM STARTED FROM UPGRADE FROM 5.1.x AND 1.6.x TO PREVIOUS BUILD 5.2

Anyway thanks -


Best Regards

Andre

P.S. Do I need special permission to resel license to our new OEM control system