Wingate VPN conflict with Hauppauge Digital TV Card

[andrewdav]

Hi. I have recently successfully set up a VPN using Wingate. However, when I try loading my DVB TV software my machine resets, but this only happens when the VPN is running. If i stop the wingate VPN engine, i can view TV no probs.

Now about the TV adapter, it is a digital tv adapter so it appears in my system as a network card with a 192.168.44.21 ip address. This shows up in wingate as a recognised network adapter so I am assuming wingate is causing some access denial to the adapter.

Any ideas?

Regards

Andrew

[neil]

This sounds like a driver conflict. The reset is most likely in the place of a BSOD. If you would like to try a new beta driver to see if this fixes your problem you can email me (neil @ qbik), and i will send it out to you.

Regards

Neil

[andrewdav]

hi neil thanks for your reply. I would certainly like to try anything that you think could solve the problem. If it helps further here are the details i'm prompted upon the reboot (taken from Windows XP event viewer)...

System error

Category 102
Event ID 1003

Error code 000000d1, parameter1 f8062c45, parameter2 00000002, parameter3 00000001, parameter4 f835424c.


Regards

Andrew