enable xp firewall?

Use this forum to post questions relating to WinGate, feature requests, technical or configuration problems

Moderator: Qbik Staff

enable xp firewall?

Postby rtchong » Sep 09 04 1:47 am

Is there any need to enable windows xp's firewall on clients while running wingate 5.2.3 on server?
Ronald
rtchong
 
Posts: 12
Joined: Jan 01 04 12:48 am
Location: Aruba

Postby labull » Sep 09 04 4:29 am

If you are using ENS you must disable the XP firewall as they don't play well together.

Larry
WinGate Lurker
labull
WinGate Guru
 
Posts: 710
Joined: Sep 06 03 1:03 am
Location: Washington, DC - USA

Postby labull » Sep 09 04 5:58 am

If you are using ENS you must disable the XP firewall as they don't play well together.

Larry
WinGate Lurker
labull
WinGate Guru
 
Posts: 710
Joined: Sep 06 03 1:03 am
Location: Washington, DC - USA

Postby Nev » Sep 10 04 1:22 am

labull wrote:If you are using ENS you must disable the XP firewall as they don't play well together.

Larry


G'day Larry,

Actually with SP2's new Security centre in the Notification area, I have found it essential for situations with 'wanabee admins' who will try to enable more or less security [depending on what they think they are trying to achieve] to implement a Group policy disabling the firewall [the first setting in the list does the trick] as well as a few other areas such as denying access to IE's Connection tab, ability to configure proxy denied, disable ICS, etc.

Nev.
Nev
WinGate Guru
 
Posts: 861
Joined: Sep 22 03 11:35 pm
Location: Mudgee ~ NSW ~ Australia

Postby Nev » Sep 10 04 1:22 am

labull wrote:If you are using ENS you must disable the XP firewall as they don't play well together.

Larry


G'day Larry,

Actually with SP2's new Security centre in the Notification area, I have found it essential for situations with 'wanabee admins' who will try to enable more or less security [depending on what they think they are trying to achieve] to implement a Group policy disabling the firewall [the first setting in the list does the trick] as well as a few other areas such as denying access to IE's Connection tab, ability to configure proxy denied, disable ICS, etc.

Cheers!

Nev.

oops, am I seeing double in this thread?
Nev
WinGate Guru
 
Posts: 861
Joined: Sep 22 03 11:35 pm
Location: Mudgee ~ NSW ~ Australia

ENS and Firewall

Postby jiandc » Oct 09 04 9:10 pm

Hi,

Is it necessary to enable ENS if our WG Server is already behind a CISCO Firewall?

jian
jiandc
 
Posts: 85
Joined: May 11 04 12:47 am

Postby Pascal » Oct 09 04 11:53 pm

Depends. ENS is Qbik's Extended Networking Service.

It gives you Firewall, NAT, VPN, Bandwidth control, etc. With version 6.0 it also provides additional information about adapters installed in the sytem because it receives more notifications than is generally available on R3.

If your CISCO Firewall is already providing an appropriate level of security for your organisation then you can disable the Firewall portion of ENS, but, as a policy we recommend that you keep ENS itself; simply for the large number of features it gives you.

Are you having problems with ENS, such as blue-screens or incompatibilities?
Pascal

Qbik New Zealand
pascalv@qbik.com
http://www.qbik.com
Pascal
Qbik Staff
 
Posts: 2623
Joined: Sep 08 03 8:19 pm
Location: Auckland, New Zealand

Postby jiandc » Oct 10 04 12:29 am

We regularly experience hang-up problem on our WG Server.
jiandc
 
Posts: 85
Joined: May 11 04 12:47 am

Postby Pascal » Oct 10 04 6:30 pm

Hang-up problem. Is that a blue-screen of death - or a lock-up where WinGate refuses to do anything? Or does the physical system lock-up, so you can't use any Windows programs?
Pascal

Qbik New Zealand
pascalv@qbik.com
http://www.qbik.com
Pascal
Qbik Staff
 
Posts: 2623
Joined: Sep 08 03 8:19 pm
Location: Auckland, New Zealand

Postby jiandc » Oct 10 04 6:38 pm

Sometimes the Server locks up but most of the time Wingate refuses to do anything especially every morning and we had to manually restart the Server for it to work again.

Yesterday, I disabled WG Firewall and until now we did not have any problem.
jiandc
 
Posts: 85
Joined: May 11 04 12:47 am


Return to WinGate

Who is online

Users browsing this forum: Bing [Bot] and 3 guests