Firewall/block ip's

[ekkas2]

I'm using WG6Pro with 3 NICs
1) To Internet (192.68.254.254) (Filesharing disabled)
2) To WiFi LAN (10.1.1.1) (Filesharing disabled)
3) To Local LAN (192.68.0.1) (Filesharing enabled)

Users on WiFi LAN can still log on to 192.68.0.1 and see my files that Iwant only shared for local LAN.

Can I block all but 1 or 2 IP's (10.x.x.x) from accessing that IPs(192.68.0.x)?


Thanks

[adrien]

Hi

How do you connect to the Internet?

If your WinGate goes out through another NAT router, you could try setting the WiFi NIC in WinGate to be a DMZ adapter.

This will let you control access to WinGate from it.

The down-side is then packets from the WiFi network to the internet will not be NATted by WinGate (which isn't a problem if you are going out through another NAT) - they will be routed instead. This will mean you will need to add a route to your external NAT/router so it knows where the Wifi network is - that route would be for 10.0.0.0 MASK 255.255.255.0 via 192.68.254.254

Adrien