NAT Issue

[maznos]

I used to have all NAT connection visible in my gatekeeper but now it is not
I am not sure but after the installation of an ethernet ADSL modem this happened


one more thing

I want to use a second NIC to restrict direct access to ADSL by making the ADSL only to that new NIC but NAT connection fails

Waiting for your soon reply

Thank you

Maz

[jamesc]

Hi Maz,

I used to haveI used to have all NAT connection visible in my gatekeeper but now it is not. I am not sure but after the installation of an ethernet ADSL modem this happened

It could be that the new ADSL modem has DHCP on, and is passing out a different Gateway; so connections are now going directly to the router instead of via WinGate.

I want to use a second NIC to restrict direct access to ADSL by making the ADSL only to that new NIC but NAT connection fails

Definitely the recommended way, no one can bypass WinGate then. The key to setting that up is making sure your network adapters were detected correctly. The network card to the internet should be marked as External (default friewalled) and the network card pointing to your LAN should me marked as Internal (default allow any connection). Please see section 2 of the following knowledge base article for more info.

http://support.qbik.com/index.php?_a=kn ... ils&_i=123


Also, the latest version of WinGate is 6.1.1; all WinGate licenses can have their installations upgraded, but only the features originally bought would be enabled; request a trial to see the new features.

[maznos]

Thank you jamesc

I figured out the problem

1st i made the adsl only connected to the second NIC and it is successfully done
2nd the problem was in the gateway settings of the main NIC
it was configured to use the adsl directly so the wingate didnt catch the requests of NAT

Now things is OK

Thank you for your support


Maz