ip conflict

Sep 05 05 11:57 pm

hi
dear sir, i have installed your wingate software. our network ip series is 192.100.99.x and subnetmask 255.255.255.0. i have installed 192.100.99.211. after installation our network is slow. andeverybody told ipconflict. then i have removed your wingate we dont have andy problem. and aslo this system has hangour(wingate server system).
please give solution
s. ramesh

Sep 06 05 3:01 am

Hi,

the answer to your problem is given in your description: ip-conflict. Obviously 192.100.99.211 is already assigned to another machine in your network. Find an unused ip-adress for your new wingate-server or propably think about using dhcp in your network ;-)

Regards

Dirk

Sep 06 05 3:09 pm

Also, please check your Network tab in GateKeeper and make sure that your network adapters are set correctly.

WinGate automatically determines whether an adapter is internal or external (and firewalled) based on the IP address. A private IP address is considered internal and a public IP address is considered external. You are using a public IP address range on your network by the looks of things, so WinGate will set this adapter to external and firewall it.

You can change an adapter's settings by double-clicking it and changing the radio button from auto-detect to the appropriate setting.