Use this forum to post questions relating to WinGate, feature requests, technical or configuration problems
Sep 12 04 10:01 am
Same problem, mostly.
Installed the new 6.0.? version. Went to dial the internet, using netzero. It dials, says connection, says I'm logged in, sits there for 2 minutes then decides the connection isnt working and tries to redial. Wont log on fully with wingate running.
Turned of wingate. COnnected to the internet. Loaded webpages fine. Turned wingate back on, internet connection stopped responding.
Tried turning off my network adapter for the internet network. Internet connects and works fine. TUrned the adapter back on, internet stops responding. I have checked and have wingate set to use the dialup for internet traffic... it knows the internal network leads no-where. Yet whenever the internal network is enabled and wingate is on the internet goes dead.
Sep 13 04 10:50 am
ceadda wrote:Tried turning off my network adapter for the internet network.
I'm assuming you mean "internal" network, there? If so, check the adapter useage settings. This has changed since build 995, with a public IP now treated as an external interface and a private IP now treated as an internal interface.
If those settings are correct, check if there are any firewall hits at the time when you connect to the internet. It is possible that certain packets could be blocked (When they are required).
Sep 20 04 9:25 pm
Here are my 2 routing tables. First is for system with no problems (which one is working fine, both with ICS by microsoft and wingate 5) and the second is after installing wingate 6 (neither server machine nor clients cannot connect to internet). Any ideas, any suggestions?
===============================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x10003 ...00 30 05 3d ab 73 ...... Intel(R) PRO/100 VE Network Connection
0x10004 ...00 04 5a 43 67 89 ...... Linksys NC100 Fast Ethernet Adapter
0x20005 ...00 53 45 00 00 00 ...... WAN (PPP/SLIP) Interface
===============================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.31 21
0.0.0.0 0.0.0.0 202.179.28.83 202.179.28.83 1
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
192.168.0.0 255.255.255.0 192.168.0.1 192.168.0.1 20
192.168.0.1 255.255.255.255 127.0.0.1 127.0.0.1 20
192.168.0.255 255.255.255.255 192.168.0.1 192.168.0.1 20
192.168.1.0 255.255.255.0 192.168.1.31 192.168.1.31 20
192.168.1.31 255.255.255.255 127.0.0.1 127.0.0.1 20
192.168.1.255 255.255.255.255 192.168.1.31 192.168.1.31 20
202.179.28.64 255.255.255.255 202.179.28.83 202.179.28.83 1
202.179.28.83 255.255.255.255 127.0.0.1 127.0.0.1 50
202.179.28.255 255.255.255.255 202.179.28.83 202.179.28.83 50
224.0.0.0 240.0.0.0 192.168.0.1 192.168.0.1 20
224.0.0.0 240.0.0.0 192.168.1.31 192.168.1.31 20
224.0.0.0 240.0.0.0 202.179.28.83 202.179.28.83 1
255.255.255.255 255.255.255.255 192.168.0.1 192.168.0.1 1
255.255.255.255 255.255.255.255 192.168.1.31 192.168.1.31 1
Default Gateway: 202.179.28.83
===============================================
Persistent Routes:
None
- - -
===============================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x10003 ...00 30 05 3d ab 73 ...... Intel(R) PRO/100 VE Network Connection
0x10004 ...00 04 5a 43 67 89 ...... Linksys NC100 Fast Ethernet Adapter
0x40005 ...00 53 45 00 00 00 ...... WAN (PPP/SLIP) Interface
===============================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.31 1
0.0.0.0 0.0.0.0 202.179.28.83 202.179.28.83 1
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
192.168.0.0 255.255.255.0 192.168.0.1 192.168.0.1 20
192.168.0.1 255.255.255.255 127.0.0.1 127.0.0.1 20
192.168.0.255 255.255.255.255 192.168.0.1 192.168.0.1 20
192.168.1.0 255.255.255.0 192.168.1.31 192.168.1.31 20
192.168.1.31 255.255.255.255 127.0.0.1 127.0.0.1 20
192.168.1.255 255.255.255.255 192.168.1.31 192.168.1.31 20
202.179.28.64 255.255.255.255 202.179.28.83 202.179.28.83 1
202.179.28.83 255.255.255.255 127.0.0.1 127.0.0.1 50
202.179.28.255 255.255.255.255 202.179.28.83 202.179.28.83 50
224.0.0.0 240.0.0.0 192.168.0.1 192.168.0.1 20
224.0.0.0 240.0.0.0 192.168.1.31 192.168.1.31 20
224.0.0.0 240.0.0.0 202.179.28.83 202.179.28.83 1
255.255.255.255 255.255.255.255 192.168.0.1 192.168.0.1 1
255.255.255.255 255.255.255.255 192.168.1.31 192.168.1.31 1
Default Gateway: 192.168.1.1
===============================================
Persistent Routes:
None
P.S. Wingate is not working even after latest version 6.0.3.1005 was installed
Sep 20 04 10:37 pm
These routing table show that you have two defaults route - have you tried removing the default route from the internal interface?
Sep 21 04 7:56 pm
No, I did not tried to remove any route from any interface. Because I don't know how to do it. In addition, will it magically help me somehow? However, system with WinGate 5 was working just fine! Can I get legal license key for version 5 instead of my purchased for version 6?
Sep 21 04 8:00 pm
Routing has been changed significantly in v6.
First of all, make sure that the adapter usage is correct (internal/external). Then, in your system network properties open TCP/IP settings dialog and remove default route information for your internal adapter.
Sep 21 04 8:39 pm
Adapters are properly set as internal and internal manually. Here are no any mistakes. And there are no any route information in TCP/IP settings dialog.
Sep 21 04 10:38 pm
If you go to the system network properties panel, right-click on your internal adapter, choose "Properties", then choose properties on TCP/IP protocol and click on Advanced button, there will be Default gateway list - just remove whatever gateways are there.
Sep 22 04 3:24 pm
There is no any gateways. lines are clear
Sep 22 04 3:27 pm
Then your wireless connectoid sets it itself. Anyway, try this for testing:
start command (got to start/Run type cmd.exe<enter>). Then enter the following lines:
route delete 0.0.0.0
route add 0.0.0.0 mask 0.0.0.0 202.179.28.83
and try connecting from the client again.
Sep 22 04 3:48 pm
ok, i'll try. i don't have wireless connection, i use adsl. ok, whatever
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.