ssh wingate

[kril]

I tried do it by myself, I read all post about ssh via WinGate and I still don't know even how to start...
google also failed

mayby is somewhere some tutorial, or mini 'howto' which one explains how to do it


and how it looks:
internet----comp_1(with wingate server) ---comp_2(wingate client)


and I want to connect with some ssh server from comp_2 (via ssh, program: putty)... and I don't know how to configure it

It has to be through wingate (not firewall.. beacause from internet zone I get IP pocket with ttl=1)

Any help?

[genie]

SSH uses simple TCP connection on port 22 - there is nothing special that you have to do in order to make SSH client work.

[kril]

ok, I have sth like this:

Internet------ comp_1(Wingate server)------------- comp_2(client)

------ ip(comp_1)ipB-----local_area_2-------ipC(comp_2)

I try add ssh service like this:

open gatekeaper, open tab Services, add new 'tcp mapping service'
* general:
name, description: ssh
service port: 22
* bindings:
bind only to 127.0.0.1 on MS...
bind to any on local_area_2
* gateways:
use any available connection
* session:
turn off time out

and I don't know what to do in:
*'Mapping'
* 'Encryption' (I tried a lot, but propably all was wrong)
* 'Connection' (directly?)

* policies
on 100% percent good - work with http and telnet

of course I would like do this, that it would be transparent for user on comp_2, but if it is imposible how should I configure some aplication (like putty)?

any help?

[genie]

Erm... You don't have to do anything specific - however, if you want to use TCP mapping, you have to bind it on all internal adapters, not only 127.0.0.1