wingate 5.22 problem in different net section

[ccuser]

Server software information : Windows 2003 and wingate 5.22 . two network adapter, with 2 IP addresses ( internet network adapter 137.6.3.67 net mask 255.255.254.0. gateway 137.6.3.254 intranet network adapter 10.75.107.40 net mask 255.255.255.0 )
Clients are win xp or win 98
If net gateway of intranet(10.75.107.1) is blank, the clients in server's net section work well , but another user (not server’net section, such as 10.75.14.*) can’t work. If net gateway of intranet(10.75.107.1) is writed, the server's net section cannot work , but another user (not server’ net section, such as 10.75.14.*) can work well. Why ? wait impatiently for help.

[Bill.Bowen]

Do you have routing enabled on the ENS driver?

[erwin]

Hi there

Just to make sure this correct

WinGate Server

Internal IP 10.75.107.40 net mask 255.255.255.0
External (Internet IP) 137.6.3.67 net mask 255.255.254.0

If you are using the NAT connection method, without using WinGate DHCP you should set the Gateway and DNS entries in the network settings on your client machines to the Internal IP of WinGate (10.75.107.40 )

The Gateway setting on the internal Network card of the WinGate server should be left blank. As it has access thru external NIC (137.6.3.67) and its Gateway to get to the Internet

As Bill suggested, if you are attempting to bridge different Internal IP subnets (10.75.107.1, and 10.75.14.*) then in the ENS properties make sure that "support for multiple subnet works (router)" option is ticked.

Regards
Erwin