lsces wrote:labull wrote:Les,
What version of WinGate are you running?
Larry
5.1.0
( I think - can't get access at the moment, the machine seems to be down :) )
G'day all from sunny Oz!
Have seen this stop error frequently on one Win2k server using V5.07 at the time.
The resolution was to change the mainboard to suit the particular combination of two Nics. IRQL Stop Errors are because a kernel memory process tried to access memory at an IRQ at too high a level.
Hardware, device drivers or the bios can be involved.
Change the position of the NIC to another bus slot.
If embedded NIC, disable it and use a card.
Update bios from manufacturer.
Check the hardware with the MS HCL.
Change mainboard.
...are a few ideas that come to mind.
More info on the stop error could be useful >
Stop 0x0000000xA with the last 'x' in the range 1~4 depending on the bugcheck analysis [from memory so could be wrong].
Nev.